Wednesday, November 18, 2009

Puffed sleeves





Puffed sleeve has gathers at the armhole as well as at the sleeve round. There are several types of puffed sleeves. At the edge of the sleeve some will have sleeve band, some will have piping and some will have open gathers .Some will have more fullness at the top as well as at the bottom. Some will be tight the bottom and very loose at the top. Mutton leg sleeve will have more fullness at the top and will be tight fitting at the bottom. On the whole the shape of the puff sleeves depends upon the gathers.

Draw the outline of the basic plain sleeve on a brown paper and divide it in to 4 equal parts (fig 3) label them as 1, 2, 3 and 4 On another sheet of paper draw a line and arrange the four portions in the same order in the same order leaving gaps between each portion such that the new distance between J and J’ is 1½ times the original J-J’ measurement. Spaces between the four portions should be equal. Secure the portions to the sheet with pins.
Mark D’ ¾” above D and B’ ¾ below B and draw connecting lines between the four portions as shown by dotted line in the figure 5.cut along the line J’-B-J F- D-’F’and J’.T his is the draft of the puffed sleeve

Method of drafting plain sleeve




Measurements needed
Sleeve length
Sleeve round
Chest
Mark B-D on fold = Sleeve length +½” (Shaded portion is 1” for in turn for plain sleeve.)
D-C =1/12 Th chest+½”
Draw perpendiculars from D, C, and B
D-E =¼ chest -1”
D-E =C-F
B-J= half sleeve round + ½”
Join D-F and F-J
Divide D-F into four equal parts by points G,H and I. Draw perpendiculars from those points such that
G-K= ¼”, H-L=½” and I-M=¼”
Join the points F-K-H-M-D by a curved line as shown in the figure. This is the front portion of the sleeve.
Join the points F-L-D -by a curved line as shown in the figure. This is the back portion of the sleeve.
Cut the paper draft along the line B-J-F-L-M-D. Open the fold .and cut along the curved line F-K-H-M-D.
This is the draft of basic plain sleeve. Outline of the draft is traced on a fairly thick card board and a block is prepared which can be used as foundation for all other types of sleeves.

Saturday, November 14, 2009

Basics in sewing-Taking body measurements


Shoulder =A-B = Measured from the prominent bone at the end of one shoulder to the prominent bone at the end of the other shoulder.
Chest = Measured around the fullest part of the chest= C-D
Waist line. =Measured around the natural waist line= G-H
Hip = Measured around the fullest part of the hip=I-J .Usually 7” to 8” down from the waist line.It is also called seat measurement.
Upper arm = biceps =.Measured around Q-R
Sleeve width= Measured around the edge of the sleeve =O-P.
Sleeve length= Measured from B, on shoulder line, to the edge of the sleeve S
Full length for the bodice = E-F Measured from the shoulder line to waist.
Full for skirts, Salwar etc… = Measured from waist line to the bottom edge of the garment
Neck width=1/12th chest + 1/4"or to taste.
Front neck depth=1/12 th chest + 1/2 " or to taste.
Back neck depth1"+1/2"or to taste.
Full length of long skirts= M-N . Measured from nape of the neck to the bottom edge of the skirt .

Friday, November 6, 2009

Pavade Blouse( Blouse worn on long skirt)




Draft

layout
pattern pieces
Measurements

Chest
waist
shoulder
full length of the blouse= G to H
sleeve length from = A to N
sleeve width
Sleeve band width
refer here for taking mesurements

Bodice

A-B (On fold) =length of the blouse+1”
A-L waist length
A-C = ¼ chest-½”
Draw perpendiculars from the points A, C.L and B.
A-D = shoulder width +¼”
C-F =¼ chest +1½” K-N-F-O-G-H-I-C-L-B-K
B-K =F-C
A-C =D-E
J-N =½”
Join and shape F-N-K
D-O =½”
Join G-O
G-A =1/12 chest + ¼” or to taste. A-I = 1/12 chest + ½” or to taste. A-H =1
Shape back and front neck G-H and G-I
M is midpoint of J-L .A dart of ½” is stitched at the point M on both front and back of the bodice
E-E” -1”.Join and shape front armhole- E-E’-O. Join and shape back armhole F-O
Cut the draft along K-N-F-O-G-H-I-C-L-B-K. This includes front and back of bodice.
Separate front and back by cutting along the line A-B. Keep one portion aside. This is the back of the bodice. On the other portion cut front armhole shape F-E-E’-O and front neck shape G-I. This portion is front bodice draft. An extra ½”extension is added along the line A-B while cutting the material for stitching button stands. If there is more material right and left button stands can be cut along with the bodice.


Sleeve


Q-P = length of the sleeve+2”for puff - width of the band
S-Q =¼ chest+1¼”
S-T=1/12 th chest+¾”.R-P = S-Q
R-W =½”Join T-W. S-X =1/12th chest. X-U =½”
Join and shape T-X-Q back of the sleeve.
Join and shape T-U-Q front of
V-W =½’
Shape V=P.
Sleeve band
Length = a-b= c-d= width of the sleeve ( sleeve round)+ ¾” for seams
a-c=b-d=double the width of the band + 1/4"

Friday, October 9, 2009

Some other designs of pinafore dresses



Denim pinafore





Draw a perpendicular line from the point I to the line A-D.On this line mark point M such that it is just below the mid point of H-C
I-U is the waist length.U-V is 1½" wide..size of the pocket is decided according to the size of the dress and taste.
Draw lines on the Simple pinafore draft as shown in the figure (pink dotted lines).Please refer here
Bib -Cut along U-N-M-I (-IU on fold) ---2 pieces
Waist band- Cut along U-’N’-O-V (U-’V ‘on fold width U-’V’ being double the width U-V in the skirt)—2 pieces
Back skirt - Cut along V-O-H-B (V-B on fold)
Front skirt – Cut along V-T-P-H-B (V-B on fold)
Pocket layer 1 - Cut along S-T-O-P-Q-R--S
Pocket layer 2- Cut along S-T-P-Q-R-S
See the different parts in the figure.
While cutting on the material leave ½” all around except for the sides for seams
Parts 






Stitching

Skirt front -Keep pocket layer 2 on skirt front, right sides together along the curve T-P .clip at 2 or 3 places .turn the pocket layer inside and press.
Keep and pin the skirt front on the right side of the pocket layer 1 such that points T-S-R-Q-P Match (consider all the three layers-Skirt front, pocket layer1 and pocket layer 2).Stitch pocket layer1 to pocket layer 2 along the line S-R-Q Baste the pocket to the skirt along the line S-T and P-Q.Other side of the pocket is also stitched in the same manner.
Stitch the Waist band along V-O to the skirt front keeping wrong side of the skirt and the right side of the band together. Press .Fold ½” along the line U-’N’ and again fold to the front and stitch to the right side of skirt along the line VT. Waist band is attached to the skirt back in the same manner.

Bib

Bias bind arm hole and neck line .Attach bib to the waist band keeping the waist band ½” above the line UN of the bib
Stitch the sides of the skirt together
Shoulder straps –Fold ½” and stitch along the length of the shoulder strap. Attach them to the front and back of the bib.Stitch the bottom hem by folding 1". Finally top stitch .

Thursday, October 8, 2009

Simple pinafore dress



Method of drafting





A-B = length of the dress + 1” + 1/2 “
A-D -= I /4 chest+ 1/2”
Draw perpendiculars from A, D and B and mark the points C, E and F as follows:-
A-C = shoulder width + ½ “
D-E=1/4 chest +1” + ½”
B-F = D_E + 2”
A-C =D-L .Mark point G on C-L such that C-G = ½” Join H-G
Join E-F. Mark H such that H-F =1”
A-H = 1/12 chest + ¼”. A-I = 1/12 chest + ½”
A-K=1”
Shape back neck K-H, Front neck I-H.Shape scye C-G-E. Shape bottom .B-H

If the cloth is wide enough button stands can be cut along with the back as shown. Otherwise separate pieces are joined.

 Parts




 Stitching

Join left and right of the back pieces till the button stands. (Shown by dotted line) 

Stitch right and left button stands .Join shoulders .Stitch neck and armholes with matching piping. Stitch

sides. Finally fold bottom by 1” and hem.