Tuesday, June 23, 2015

Method of preparing bodice block and sleeve block

Measurements
Chest
Shoulder
Waist
Hip
Waist length
Hip length
Full length
Sleeve length
Sleeve round



bodice block and sleeve block
This is the basic pattern of bodice block and sleeve block. Using this you can design any style of garment you like.

Bodice block (Figure 1)

Fold a sheet of paper and mark A on the fold as shown in the figure 1. Mark points D, G and J on the fold line as explained below.
.Mark point D such that A-D =⅛ chest +2½”.This is scye depth
Mark point G such that A-G = waist length +½”
Mark point J such that A-J =hip length +2” to 3”.  A-J can be increased according to the taste or according to the style of the dress. This will be full length of the garment.
Draw perpendiculars from the points A, D, G and J. to the line A-J.
 On the perpendicular at A. mark point B such that A-B=¼ chest +1½”.
On the same line mark point C such that A-C=½ shoulder +¼”. This is shoulder line.
Mark point M such that A-M =⅟₁₂ chest (or to taste) +¼”.This is neck width
On the line A-J Mark point N such that A-N =1” to 1½” (or to taste) this is back neck depth. Join
 points M and N by a curved line M-N is back neck line..
On the same line A-J mark point O such that A-O= ⅛ chest or to taste. This is front neck depth.
Join point M-O by a curved line. This is front neck line.
From the point B drop a perpendicular B-K to the line to the line A-B, such that B-K =A-J.
 From the point D draw a perpendicular. Let this line meet the line B-K at the point F. A-B =B-F .This is chest line.
 From the point G draw a perpendicular, let this line  meet the line B-K at a point H .On the line G-H mark point I such that I-H=¾”.G-I is the waist line.
Join points J and K and produce. On this line mark point L such that K-L =¼ seat +1½”
This is hip line.
On the chest line mark point E such that A-C =D-E.
Join C-E. On this line mark point Q such that C-Q=1”.Join M-Q.
On the line C-E mark Point P such that E-P= ¾” or 1”Join the points Q-E and Q-P-F as shown in the figure. Q-P-F is front armhole curve and Q-F is back armhole curve.
On the line G-I, mark point R such that G-R =⅟₁₂ chest + ½”. Draw perpendicular lines on  R-S and R-S’ from the point R, perpendicular to the line G-I on either side. R-S=R-S’=⅙ chest. At the point R a dart of ¾” is taken on either side.
Join  F-I-and L by a curved line as shown in the figure. This is side seam line. In this draft I have
added ½” for seams. While cutting the fabric you can increase this by ¾ “by drawing another line parallel to and ¾” away from the original side seam line. It is better to keep more seam width in case you want to loosen the garment. On the line I-L mark L’ such that L-L’ =¾”.Join J-L’ by a smooth curve .This is the bottom seam line of the garment.
Cut along the back neck line N-M→ shoulder line M-Q→ back armhole curve Q-F → side F-I-L’ → bottom hem line L’J.
Separate the two layers of sheet by cutting along the line N-O-D-G-J. Keep one layer on which there is no marking aside. This is the draft of the bodice back.
 On the other layer cut along the front neck line M-O and front armhole curve C-E-F. This is the draft of the bodice front.

Sleeve block (Figure 2 and 3)

Fold a sheet of paper and mark point A, 2 “away from the edge of the paper. Mark point B on the fold such that A-B = sleeve length +¼”.
From point B draw a perpendicular B-C whose length =⅛chest + 2½”( Please note that this is equal to  the scye depth of the bodice)  From point A draw a perpendicular line A-D such that A-D = B-C.Join D-C.
On D-C mark point E such that E-C =⅛chest.
On the line B-C Mark point F such that B-F =1”.
Join F-E.
H is the middle point of E-F.H-I is perpendicular to H-F and its length is equal to ¾”.
From the point E draw a perpendicular line E-G whose length is equal to 2”Join F-E by a smooth curved line as shown in the figure. This is front armhole curve of the sleeve.
Join F-I-E as shown in the figure 3 by a smooth curve. This is back armhole curve of the sleeve.
On the line A-D mark point L such that A-L equal to half sleeve round +1”.
Join L-This is the side line of the sleeve.
Produce Line B-A to J such that A-J =1¼”. From the point J draw a line parallel to A-D.
Draw a line K-L as shown in the figure 3.
This gives a nice finish while folding and sewing sleeve edge.
Cut along the lines B-F-I-E → E-L → L-K → K-J. Open the fold and cut front armhole curve.This is the draft of the sleeve.
In this draft I have added ½” for seams. While cutting the fabric you can increase this by ¾ “by drawing another line parallel to and ¾” away from the original side seam line. It is better to keep more seam width in case you want to loosen the garment.
Photobucket